Types Of Welding Processes

Along with having the necessary welding equipment, it is important to know about the various welding processes.

  • TIG welding is also known as GTAW or gas tungsten arc welding. The electrode used for this welding is known as non-consumable, and the material it is made from is tungsten. No filler metal is needed for TIG welding; the only two metals used are the ones that are being welded together. If you prefer to use a filler metal, it has to be fed by hand. A requirement for TIG welding is a gas tank so that there is a constant gas flow to protect the weld. This type of welding is best done indoors out of the elements.
  • FCAW is like MIG welding. A wire performs as the electrode, and you feed the filler metal into the wand. The wire used has a flux core creating a shield of gas. There is no need for an outside supply of gas. This welding process is best done with heavier and thicker metals since it is a high-heat welding method. Often heavy equipment is repaired this way. Since no external gas is required, this is an efficient process, not creating much waste.
  • SMAW or stick-shielded metal arc welding, was a process that began in the 1930s. Today, the process has been improved and updated. This type of welding is a popular form since it is easy to learn. It is an affordable welding process that does not cost much to operate. The only drawback is that it doesn’t create the neatest welds due to splattering. “Stick” is an electrode that can be replaced and is the metal filler. There is an arc created connecting from the end of the stick to the metals at the base. To create the weld, it melts the electrode into filler metal. This welding process can be done outdoors because no gas is required. SMAW works fine for surfaces that are dirty, painted, or rusted. It is often used to repair equipment. This is a highly skilled process requiring a long learning curve.
  • MIG or GMAW is known as a simple form that can be performed even by beginning welders.MIG means inert metal gas. It is a fast process where the filler metal gets fed into the wand. To shield it from outside elements, gas is expelled around it. It is not a process to be done outdoors but is a versatile process that can weld different types of metal types of various thicknesses. A spool contains the consumable wire, which is the filler metal and also the electrode. The wire melts when an arc is created from the tip of the wire and reaches the base metal. A welder can choose their desired speed since the wire is continuously fed through the wand. This process created a smooth and tight weld.
  • Laser beam welding is used for thermoplastics and metals. Its source of heat is a laser used to make welds. This welding process can be used for different types of materials, such as aluminium. It is often used in manufacturing processes like making automobiles.
  • Electron-beam welding is a process where a high-velocity beam of electrons becomes a heat source through the use of kinetic energy and welds together two materials. This kind of welding is highly sophisticated and usually done by machines.
  • The arch welding, known as Plasma, is a process similar to GTAW, only using a smaller arc. With the torch higher temperatures are created. Plasma is created when gas is pressurized in the wand. After this, the Plasma becomes ionized and conductive electrically. Temperatures that are extremely high melt the base metals, allowing the plasma arc welding to be done with no filler metal.
  • Atomic hydrogen welding makes use of high heat and is also known as arc-atom welding. This welding process makes use of hydrogen gas in order to shiel two tungsten electrodes. This process also requires no filler metal and is an older welding form replaced by MIG welding.
  • Electroslag is a welding process that is advanced and used to vertically join together the thin edges of double metal plates. Acting as the filler metal a consumable metal guide tube is fed an electrode wire of copper. Electricity creates the arc, and at the bottom of the seam, a weld begins. This is a process that is done by a machine.

Whatever method you choose, always remember that ACL Industries are a welding supply store that can supply you with your welding needs.